Numerical analysis and stability assessment of complex secondary toppling failures: A case study for the south pars special zone

Date

2021-12-01

Author

Azarafza, Mohammad
Bonab, Masoud Hajialilue
Akgün, Haluk

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

172
views

0
downloads

This article assesses and estimates the progressive failure mechanism of complex pit-rest secondary toppling of slopes that are located within the vicinity of the Gas Flare Site of Refinery No. 4 in South Pars Special Zone (SPSZ), southwest Iran. The finite element numerical procedure based on the Shear Strength Reduction (SSR) technique has been employed for the stability analysis. In this regard, several step modelling stages that were conducted to evaluate the slope stability status revealed that the main instability was situated on the left-hand side (western) slope in the Flare Site. The toppling was related to the rock column-overburden system in relation to the overburden pressure on the rock columns which led to the progressive instability of the slope. This load transfer from the overburden has most probably led to the separation of the rock column and to its rotation downstream of the slope in the form of a complex pit-rest secondary toppling. According to the numerical modelling, it was determined that the Strength Reduction Factor (SRF) decreased substantially from 5.68 to less than 0.320 upon progressive failure. The estimated shear and normal stresses in the block columns ranged from 1.74 MPa to 8.46 MPa, and from 1.47 MPa to 16.8 MPa, respectively. In addition, the normal and shear displacements in the block columns ranged from 0.00609 m to 0.173 m and from 0.0109 m to 0.793 m, respectively.

Subject Keywords

finite element method, Iran, rock slope stability, secondary toppling, ROCK SLOPES, LIMIT-EQUILIBRIUM, MARLS, SYSTEMS, BLOCKS

URI

https://hdl.handle.net/11511/95180

Journal

GEOMECHANICS AND ENGINEERING

DOI

https://doi.org/10.12989/gae.2021.27.5.481

Collections

Department of Geological Engineering, Article

Suggestions

OpenMETU
Core

Marine debris in bottom trawl catches and their effects on the selectivity grids in the north eastern Mediterranean Eryasar, Ahmet Raif; ÖZBİLGİN, HÜSEYİN; Gücü, Ali Cemal; Sakman, Serdar (2014-04-15) In this study composition of marine debris and their blocking potential on the selectivity grid systems deployed on demersal trawls were investigated in the north eastern Mediterranean. For this, a total of 132 hauls were examined in two fishing season between 20 September 2010 and 19 February 2012. Results showed that plastic items were the most abundant debris (73% in terms of weight) and they were followed by metals (10%). Because of plastics and packing debris, it is highly probable that grids may have ...
GIS-based landslide susceptibility mapping for a problematic segment of the natural gas pipeline, Hendek (Turkey) Cevik, E; Topal, Tamer (2003-11-01) A segment of natural gas pipeline was damaged due to landsliding near Hendek. Re-routing of the pipeline is planned, but it requires the preparation of a landslide susceptibility map. In this study, the statistical index (Wi) and weighting factor (Wf) methods have been used with GIS to prepare a landslide susceptibility map of the problematic segment of the pipeline. For this purpose, thematic layers including landslide inventory, lithology, slope, aspect, elevation, land use/land cover, distance to stream,...
Geotechnical investigations and preliminary support design for the Gecilmez tunnel: A case study along the Black Sea coastal highway, Giresun, northern Turkey Akgün, Haluk; Kockar, Mustafa Kerem (2014-02-01) This study encompasses geotechnical investigations, stability assessments and design of the preliminary support systems for the Gecilmez tunnel which is constructed in Giresun for the improvement of the highway along the Black Sea coast. During the study, a detailed geological map of the study area was prepared and the geotechnical characteristics of the rock masses were determined. The rock mass classification of the tunnel grounds was performed by utilizing the RMR method, Q system, NATM and the Geologica...
Geotechnical characteristics and empirical geo-engineering relations of the South Pars Zone marls, Iran Azarafza, Mohammad; Ghazifard, Akbar; Akgün, Haluk; Asghari-Kaljahi, Ebrahim (2019-12-10) This paper evaluates the geotechnical and geo-engineering properties of the South Pars Zone (SPZ) marls in Assalouyeh, Iran. These manly beds mostly belong to the Aghajari and Mishan formations which entail the gray, cream, black, green, dark red and pink types. Marls can be observed as rock (soft rock) or soil. Marlstone outcrops show a relatively rapid change to soils in the presence of weathering. To geotechnically characterise the marls, field and laboratory experiments such as particle-size distributio...
Evaluation of alluvial deposits in Gemlik basin in terms of earthquake codes. Avşar, Ulaş; Doyuran, Vedat; Department of Geological Engineering (2006) Gemlik County is located in the Marmara Region (NW Turkey), which has been affected by destructive earthquakes sourced from North Anatolian Fault System throughout its history. The bulk of the settlement rests on alluvial deposits of the Gemlik pull-apart basin. So, it is vital to investigate the foundation soils in this basin and the response of them to earthquakes. Many earthquake codes were established by the authorities in different countries of the world to estimate the possible ground shaking and seis...

Citation Formats

M. Azarafza, M. H. Bonab, and H. Akgün, “Numerical analysis and stability assessment of complex secondary toppling failures: A case study for the south pars special zone,” GEOMECHANICS AND ENGINEERING, vol. 27, no. 5, pp. 481–495, 2021, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/95180.