Deutsch
 
Hilfe Datenschutzhinweis Impressum
  DetailsucheBrowse

Datensatz

DATENSATZ AKTIONENEXPORT
Zur Ablage hinzufügen
  Lokale TagsFreigabegeschichteDetailsÜbersicht

Freigegeben
Zeitschriftenartikel

Study of rectangular beam folded waveguide traveling-wave tube for terahertz radiation

MPG-Autoren
/persons/resource/persons30535

Grieser,  Manfred
Division Prof. Dr. Klaus Blaum, MPI for Nuclear Physics, Max Planck Society;

Externe Ressourcen

https://doi.org/10.1063/1.5008287
(Verlagsversion)

Volltexte (beschränkter Zugriff)
Für Ihren IP-Bereich sind aktuell keine Volltexte freigegeben.
Volltexte (frei zugänglich)
Es sind keine frei zugänglichen Volltexte in PuRe verfügbar
Ergänzendes Material (frei zugänglich)
Es sind keine frei zugänglichen Ergänzenden Materialien verfügbar
Zitation

Lu, F., Zhang, C., Grieser, M., Wang, Y., Lü, S., & Zhao, G. (2017). Study of rectangular beam folded waveguide traveling-wave tube for terahertz radiation. Physics of Plasmas, 24(10): 103132. doi:10.1063/1.5008287.


Zitierlink: https://hdl.handle.net/11858/00-001M-0000-002E-3152-8
Zusammenfassung
To gain higher power with a lower cathode current density and a simpler structure, a novel rectangular beam folded waveguide traveling-wave tube (RB-FW-TWT) operating at 220 GHz is proposed and analyzed in this paper and compared with the normal circular beam (CB) FW TWT. The dispersion characteristic was investigated based on an equivalent circuit model. The interaction impedance and the S-parameter of a RB-FW traveling-wave tube were analyzed by numerical simulations. A 3-D particle-in-cell code CST particle studio was introduced to analyze the performance of RB-FW TWT. The influence of the initial electron energy, frequency, input power, guiding magnetic field, and aspect ratio of the RB tunnel on the circuit performance was observed, and physical explanations were given. It reveals that the output power of RB-FW can reach 51.1 dBm, 8.4% dBm higher than a CB-FW, with a 3 dB bandwidth of 35 GHz when the beam voltage and current are set to 14.25 kV and 140 mA, respectively. An aspect ratio of 0.4 is recommended to optimize the high-frequency properties and circuit performance.