Article (Scientific journals)
Tuning bimodal porosity in TiO2 photoanodes towards efficient solid-state dye-sensitized solar cells comprising polysiloxane-based polymer electrolyte
Bharwal, Anil Kumar; Manceriu, Laura; Alloin, Fannie et al.
2019In Microporous and Mesoporous Materials, 273, p. 226-234
Peer Reviewed verified by ORBi
 

Files


Full Text
Anil_MicroMesoMat_2019.pdf
Publisher postprint (2.47 MB)
Request a copy

All documents in ORBi are protected by a user license.

Send to



Details



Keywords :
Thin films; Templating; Bimodal porosity; TiO2; DSSCs; Polymer electrolytes
Abstract :
[en] This article describes a cell architecture that achieves enhanced light harvesting with less dye quantity while simultaneously improving the performance of the polysiloxane-based solid-state dye-sensitized solar cells (DSSCs). We report the synthesis of bimodal mesoporous anatase TiO2 films by a dual templating approach, combining a block-copolymer template (Pluronic P123) and polystyrene nanospheres (PS) as soft and hard templates, respectively. The AFM and TEM analysis of TiO2 films revealed a mixture of mesoporous and macroporous morphology in which dual porosity is generated by combustion of soft and hard templates. The size of the macropores was varied by employing PS beads with different diameters (62, 130 and 250 nm). The influence of the macropore size on the dye loading and pore infiltration is the main purpose of this article. The bimodal porosity leads to increased light scattering due to enhanced optical path length, and better pore infiltration of the polysiloxane electrolyte is achieved. The amount of dye uptake by the dual films is lower than that of soft films because the large pore size reduces the total surface area. The optimum bimodal structure was obtained when combining P123 surfactant and the 130 nm PS beads leading to the lowest charge transfer resistance and a high efficiency for DSSCs is reported with both liquid and polymer electrolytes. Even if the dye uptake was lower, the photovoltaic performance has been maintained and improved in some devices. The open circuit voltage and fill factor were improved, owing to a successful joining of different effects i.e. increased light harvesting, facile electrolyte penetration and reduced charge recombination.
Disciplines :
Physical, chemical, mathematical & earth Sciences: Multidisciplinary, general & others
Author, co-author :
Bharwal, Anil Kumar ;  Université de Liège - ULiège > Chimie > GREENMAT
Manceriu, Laura  ;  Université de Liège - ULiège > Département de chimie (sciences) > LCIS - GreenMAT
Alloin, Fannie;  Université Grenoble Alpes > LEPMI
Iojoiu, Cristina;  Université Grenoble Alpes > LEPMI
Dewalque, Jennifer  ;  Université de Liège - ULiège > Département de chimie (sciences) > LCIS - GreenMAT
Toupance, Thierry;  Université de Bordeaux > Institut des Sciences Moléculaires
Henrist, Catherine ;  Université de Liège - ULiège > Département de chimie (sciences) > LCIS - GreenMAT
Language :
English
Title :
Tuning bimodal porosity in TiO2 photoanodes towards efficient solid-state dye-sensitized solar cells comprising polysiloxane-based polymer electrolyte
Publication date :
2019
Journal title :
Microporous and Mesoporous Materials
ISSN :
1387-1811
eISSN :
1873-3093
Publisher :
Elsevier, Amsterdam, Netherlands
Volume :
273
Pages :
226-234
Peer reviewed :
Peer Reviewed verified by ORBi
Available on ORBi :
since 18 December 2018

Statistics


Number of views
64 (13 by ULiège)
Number of downloads
1 (1 by ULiège)

Scopus citations®
 
14
Scopus citations®
without self-citations
8
OpenCitations
 
13

Bibliography


Similar publications



Contact ORBi